Electromagnetic clutches

These are flange mounted, normally a two piece construction clutch typically mounted directly on to the pump.

Solid forged rotor

A one-piece solid forged rotor means no chance of internal parts separation. The rotors also have an even wall thickness around the coil which gives optimum flux distribution, maximising torque.

Different coil voltages available

Although 12 volt is the most common, 24 volts can also be made available. Depending upon the quantity, other specialty voltages can be made.

High temperature, longer life grease

All models include our special long life grease which has shown a significant improvement in life over other standard high temperature greases.

E-coating

Where possible, all parts in the clutch are e-coated to give maximum corrosion protection.

High temperature epoxy coil

To help prevent failure from both vibration and outside contaminants, all coils are sealed in the coil shell with a high temperature epoxy coating.

Forged machined pulley

All models in this section use a heavy duty machined pulley. A stronger pulley resists damage due to abusive environments.

Advantages of use:

» Electrically remotely actuated.

» Reduced power consumption from engine.

» Extended pump life.

» Lower operator cost.

» Simple installation.

» Operator convenience/safety.

» Cold weather starting.

For details of the many types and sizes, plus technical specification catalogue please visit jbj.co.uk

Want the best engineering stories delivered straight to your inbox? The Professional Engineering newsletter gives you vital updates on the most cutting-edge engineering and exciting new job opportunities. To sign up, click here.

Content published by Professional Engineering does not necessarily represent the views of the Institution of Mechanical Engineers.