Engineering news

Video: Bat-flight inspires micro air vehicle design

PE

Membrane wings that mimic muscles successfully tested in-flight

Innovative membrane wings that work like artificial muscles have been successfully tested in-flight, paving the way for a new breed of unmanned Micro Air Vehicles (MAVs) that have improved aerodynamic properties, can fly over long distances and are more economical to run.

The wings have been developed through a combination of hands-on experimental work at the University of Southampton and computational research at Imperial College London. Inspired by bats, the wings change shape in response to the forces they experience and have no mechanical parts, making MAVs incorporating them easier to maintain.

The design of the wings incorporates electro-active polymers that make the wings stiffen and relax in response to an applied voltage and further enhances their performance.

By changing the voltage input, the shape of the electroactive membrane and therefore aerodynamic characteristics can be altered during flight. The proof of concept wing will eventually enable flight over much longer distances than currently possible.

Sometimes as small as 15cm across, MAVs are increasingly used in a wide variety of civil and military applications, such as surveying remote and dangerous areas. One emerging trend among MAV developers is to draw inspiration from the natural world to design vehicles that can achieve better flight performance and that offer similar levels of controllability to small drones but use the efficiency provided by wings to fly much further.

The Southampton-Imperial team have focused on mimicking the physiology of bats – the only type of mammal naturally capable of genuine flight. To inform and speed up the design process, the Imperial team built computational models and used them to aid the construction of a test MAV incorporating the pioneering ‘bat wings’.

Dr Rafael Palacios of Imperial’s Department of Aeronautics, who led this aspect of the project, said: “No-one has tried to simulate the in-flight behaviour of actuated bat-like wings before, so we had to go back to fundamentals, develop the mathematical models and build the multiphysics simulation software we needed from scratch. We had to make sure it could model not only the wings themselves but also the aerodynamic flows around them and the effect of the electric field generated across them.” 

The Southampton team incorporated some of these findings into a 0.5m-wide test vehicle, designed to skim over the sea’s surface and, if necessary, land there safely. After extensive wind tunnel testing, the vehicle was put through its paces at a nearby coastal location. 

Professor Bharath Ganapathisubramani of the University of Southampton’s Aerodynamics and Flight Mechanics Group, who has led the overall project, said: “We’ve successfully demonstrated the fundamental feasibility of MAVs incorporating wings that respond to their environment, just like those of the bats that have fuelled our thinking. We’ve also shown in laboratory trials that active wings can dramatically alter the performance. The combined computational and experimental approach that characterised the project is unique in the field of bio-inspired MAV design.”

The next step is to incorporate the active wings into typical MAV designs, with deployment in real-world applications potentially achievable over the next 5 years. 

“This is a paradigm shift in the approach to MAV design. Instead of a traditional approach of scaling down existing aircraft design methods, we constantly change the membrane shape under varying wind conditions to optimise its aerodynamic performance,” said Palacios.

The 3.5 year research project ‘Towards Biologically Inspired Active-Compliant-Wing Micro Air Vehicles’ began in June 2012 and has received total EPSRC funding of around £249,000.

The United States Air Force, through their European Office of Aerospace Research and Development (EOARD), provided additional support.

Share:

Read more related articles

Professional Engineering magazine

Current Issue: Issue 1, 2025

Issue 1 2025 cover
  • AWE renews the nuclear arsenal
  • The engineers averting climate disaster
  • 5 materials transforming net zero
  • The hydrogen revolution

Read now

Professional Engineering app

  • Industry features and content
  • Engineering and Institution news
  • News and features exclusive to app users

Download our Professional Engineering app

Professional Engineering newsletter

A weekly round-up of the most popular and topical stories featured on our website, so you won't miss anything

Subscribe to Professional Engineering newsletter

Opt into your industry sector newsletter

Related articles