Energy

Fit-for-service Pressure Systems for the Energy Transition

The UK’s energy system transition is underpinned by a number of technologies, most of which rely significantly on pressure systems and equipment.

1 day

Next available:

Members: £350 + VAT
Non-members: £400 + VAT

Fantastic well organised event put on by the Pressure Systems Group. A lot of varied content, which is all very relatable to my line of work. great opportunity to share best practice and learn from others mistakes

- BAE Systems

Course Location & Date
Fit-for-service Pressure Systems for the Energy Transition
Members:
£350.00 Plus vat
Non Members:
£400.00 Plus vat

Summary

The UK’s energy system transition is underpinned by a number of technologies, most of which rely significantly on pressure systems and equipment.

In many cases there is the opportunity to repurpose existing infrastructure and assets, in others there is a requirement for safe, reliable, and sustainable design.

This seminar will address the challenges for pressure systems engineers in the energy sector who are working to ensure their assets meet the demands of this once-in-a-lifetime transition. These include the transport and storage of hydrogen and carbon dioxide, both of which exert additional risks compared to gases like methane, air or steam. Additionally, much of the infrastructure to be utilised in decarbonisation is mature – meaning it will need to be life-extended and retrofitted for its new application. Furthermore, the standards for the transport and storage of hydrogen and carbon capture are not as mature or well understood.

In concert with these challenges, the remote or offshore placement of much of this infrastructure constrains the practical level of inspection and maintenance which can be carried out compared to traditional onsite operations. This necessitates better design for inspections or safety cases that call for reduced maintenance.

This event will bring together experts in the design, manufacture, structural integrity management, operation, inspection, and maintenance of pressure equipment in the energy sector, enabling the sharing and transfer of best practice. Through a mix of case-study presentations and expert knowledge sharing, this seminar will reduce your risk of safety incidents, unplanned outages, and environmental hazards.

Who should attend?

CO-LOCATED EVENT - ACCESS 2 EVENTS IN ONE LOCATION:

This seminar is co-located with the Institution's Engineering Challenges in Carbon Capture, Transport, and Storage seminar. Attendees to either seminar will have access to shared networking opportunities throughout the day. Attendees will receive copies of the slides from both seminars post-event.

Maximise your organisation's learning and networking opportunities for your organisation! Companies sending three delegates across both events are eligible for a 10% discount on registration, and those sending four or more delegates will receive a 15% discount.

To organise your group booking, just contact our Event Enquiries team and we would be delighted to make all the arrangements.

How will I benefit?

  • Hear guidance on best practice for safely transporting and storing H2 and CO2
  • Learn about the feasibility for utilising existing infrastructure, including the inspection and retrofitting challenges associated
  • Understand how to design equipment which can be operated, inspected, and maintained appropriately in challenging or remote environments
  • Connect with engineers facing the same materials and structural integrity challenges
  • Ensure the application of best practice in operating your pressure assets, particularly those in safety critical applications
  • Identify emerging opportunities to develop partnerships and win contracts supporting the energy transition
  • Arm your people with the knowledge and network needed to thrive in a changing energy landscape

Contributes 7 CPD hours

Mapped against UK- SPEC competencies: A, B and E

  1. Knowledge and understanding - For Chartered Engineers: ‘Use a combination of general and specialist engineering knowledge and understanding to optimize the application of existing and emerging technology’ For Incorporated Engineers: ‘Use a combination of general and specialist mechanical engineering knowledge and understanding to apply existing and emerging technology’
  2. Design and development of processes, systems, services and products - For Chartered Engineers: ‘Apply appropriate theoretical and practical methods to the analysis and solution of mechanical engineering problems’ For Incorporated Engineers ‘Apply appropriate theoretical and practical methods to design, develop, manufacture, construct commission, operate, maintain, decommission and re-cycle mechanical engineering processes, systems, services and products’
  3. Professional commitment - For Incorporated and Chartered Engineers: ‘Demonstrate a personal commitment to professional standards, recognising obligations to society, the profession and the environment’

In-house and bespoke training

Tell us your team's CPD needs and we'll come to you with a specialised training programme, customised for your engineering sector.
Contact our advisors if you need help finding the most appropriate training for your team.

Share:

At a glance

  • Duration:
    1 day
  • Location:
    Glasgow
  • CPD Hours:
    7
  • UK-Spec:
    A, B, E

Need some help?

Contact us if you have any questions about our training courses.

Terms & conditions of booking IMechE training

Train your team

Offers and bundles

A range of options to help you maximise your training budget.

More about offers and bundles

Available dates for Fit-for-service Pressure Systems for the Energy Transition

1 day course

Glasgow
02 Oct 2024

Require a different date or location? Or want to train a group in house?

We can customise any of our courses and deliver them in-house, for your entire team. It could also save you money, especially as you would save travel time.

More about In-house and bespoke training

Register your interest

Members: £350 + VAT

Non-members: £400 +VAT

Enquire now

Train a group in-house and save

Related courses

  • 2 day course

    Design of piping systems

    A holistic view of the design of piping systems, providing practical tools and guidance on what takes to design and operate safe and efficient systems.

  • 1 day course

    Compressors and fans

    An introduction to the application of compressors and fans and their characteristics.

  • 1 day course

    Pressure testing

    Understand the requirements for pressure testing of piping systems and learn about the whole pressure test process from planning to execution and record keeping.

Train your team

Tell us your team’s development needs and we’ll come to you with a specialised training programme, customised for your organisation.

What options are available?

  • Off the shelf – we can deliver any of our training courses at your chosen location, providing you with a cost-effective and efficient solution
  • Tailored courses– our personalised programmes can help you work through issues specific to your team or sector and equip you with the practical tools you need to move forward
  • Blended programmes – we use a range of delivery methods, development subjects and performance resources to ensure your team have the knowledge and skills they need to help your business thrive

More about in-house and tailored training.

Request a Training catalogue

Discover the most extensive series of professional development courses for engineers who are committed to shaping the future of our sector.

Some of the companies we've worked with

  • Alten
  • AMH Material Handling
  • Avara Foods
  • bmt
  • Bombardier
  • Bombardier
  • Frazer Nash
  • Gas Networks Ireland
  • International Nuclear Services
  • JCB
  • Martin Baker
  • National Composited Centre
  • Network Rail
  • Smurfit Kappa
  • sse

Our training acumen

  • Over 30 years of experience delivering training
  • More than 200 courses designed for engineers
  • Over 10,000 engineers trained each year
  • Trusted by over 800 companies
  • Business solutions delivered in 48 countries

Average customer rating: 4.75 out of 5


Get in touch

Get in touch if you need help finding the right course, or qualification, for you or your team.

Terms & conditions of booking IMechE training