Become a Member
Engineering essentials

Geometric dimensioning and tolerancing: ASME Y14.5

In this geometric dimensioning & tolerancing (GD&T) workshop we present understandable tools your entire team can use.

3 days

Next available:

Members: £1,495 + VAT
Non-members: £1,695 + VAT

Course Location & Date
Geometric dimensioning and tolerancing: ASME Y14.5
10% early bird discount applied
Hurry! 297 days left
Members:
£1,495.00 £1,345.50 Plus vat
Non Members:
£1,695.00 £1,525.50 Plus vat
Book now

Summary

In this geometric dimensioning & tolerancing (GD&T) workshop we present understandable tools your entire team can use.

A concurrent engineering team, equipped with the proper tools, has the ability to shorten time to market, reduce engineering changes and create a robust quality design.

Design decisions should be optimised for quality, cost and delivery at the sketch phase, when an engineering change costs a few pennies (rather than hundreds or thousands of pounds months later).

The drawing is the common thread of the concurrent engineering team. By using these methods, you can base design decisions on fact rather than emotion and past practices.

Who should attend?

This course is suitable if you use GD&T to design, produce and inspect parts: mechanical engineers, designers, managers, production planners, inspectors, machinists and supplier quality personnel.

How will I benefit?

After the course you will be able to:

  • Translate geometric feature control frames into plain English with one clear meaning
  • Explain the major rules found in the ASME Y14.5-2009 standard
  • Explain the tolerance zones for the 14 geometric characteristics
  • Understand the hierarchy of geometric tolerancing
  • Recognise proper application of GD&T
  • Calculate geometric tolerances and boundaries
Contributes 21 CPD hours

Key topics

  • What is GD&T?
  • Datums
  • Datum feature controls
  • Advanced datum concepts
  • Form
  • Orientation
  • Profile
  • Position and symmetry
  • Coaxial features

Mapped against UK- SPEC competencies: A, B, C and E

  1. Knowledge and understanding - For Chartered Engineers: ‘Use a combination of general and specialist engineering knowledge and understanding to optimize the application of existing and emerging technology’ For Incorporated Engineers: ‘Use a combination of general and specialist mechanical engineering knowledge and understanding to apply existing and emerging technology’
  2. Design and development of processes, systems, services and products - For Chartered Engineers: ‘Apply appropriate theoretical and practical methods to the analysis and solution of mechanical engineering problems’ For Incorporated Engineers ‘Apply appropriate theoretical and practical methods to design, develop, manufacture, construct commission, operate, maintain, decommission and re-cycle mechanical engineering processes, systems, services and products’
  3. Responsibility, management or leadership - For Incorporated and Chartered Engineers: 'Provide Technical and commercial leadership’
  4. Professional commitment - For Incorporated and Chartered Engineers: ‘Demonstrate a personal commitment to professional standards, recognising obligations to society, the profession and the environment’

In-house and bespoke training

Tell us your team's CPD needs and we'll come to you with a specialised training programme, customised for your engineering sector.
Contact our advisors if you need help finding the most appropriate training for your team.

Share:

At a glance

  • Duration:
    3 days
  • Location:
    London
  • CPD Hours:
    21
  • UK-Spec:
    A, B, C, E

Need some help?

Contact us if you have any questions about our training courses.

Terms & conditions of booking IMechE training

Train your team

Offers and bundles

A range of options to help you maximise your training budget.

More about offers and bundles

Available dates for Geometric dimensioning and tolerancing: ASME Y14.5

3 day course

London
15-17 Dec 2025 10% discount available until 15 October

Require a different date or location? Or want to train a group in house?

We can customise any of our courses and deliver them in-house, for your entire team. It could also save you money, especially as you would save travel time.

More about In-house and bespoke training

Register your interest

Members: £1,495 + VAT

Non-members: £1,695 +VAT

Enquire now

Train a group in-house and save

Train your team

Tell us your team’s development needs and we’ll come to you with a specialised training programme, customised for your organisation.

What options are available?

  • Off the shelf – we can deliver any of our training courses at your chosen location, providing you with a cost-effective and efficient solution
  • Tailored courses– our personalised programmes can help you work through issues specific to your team or sector and equip you with the practical tools you need to move forward
  • Blended programmes – we use a range of delivery methods, development subjects and performance resources to ensure your team have the knowledge and skills they need to help your business thrive

More about in-house and tailored training.

Request a Training catalogue

Discover the most extensive series of professional development courses for engineers who are committed to shaping the future of our sector.

Some of the companies we've worked with

  • Alten
  • AMH Material Handling
  • Avara Foods
  • bmt
  • Bombardier
  • Bombardier
  • Frazer Nash
  • Gas Networks Ireland
  • International Nuclear Services
  • JCB
  • Martin Baker
  • National Composited Centre
  • Network Rail
  • Smurfit Kappa
  • sse

Our training acumen

  • Over 30 years of experience delivering training
  • More than 200 courses designed for engineers
  • Over 10,000 engineers trained each year
  • Trusted by over 800 companies
  • Business solutions delivered in 48 countries

Average customer rating: 4.75 out of 5


Get in touch

Get in touch if you need help finding the right course, or qualification, for you or your team.

Terms & conditions of booking IMechE training